background

R2 Assembly Seal

R21-removebg-previews

Standard pump seal for mild corrosive and abrasive fluid. Bleaches, Paper stock etc. Welded metal bellows, o-ring secondary seal. No springs.

Features and Benefits
  • Stop clogging problems that plague multiple spring loaded seals. Suspended particles are thrown away from the bellows convolutions by centrifugal force.
  • Another advantage of this seal is it’s inherent pressure balanced design, being able to withstand pressures up to 300 psi and down to vacuum without using costly stepped shafts or sleeves.
  • Effective 360? contact is maintained on sealing faces despite minor shaft movement and runout.
  • Vibration dampening design helps control excessive vibration which can cause either improper face/seat seating or fatigue failure resulting in excessive seal leakage.

Technical Data and Dimensions

r2-dimensions

All standard dimensions will be customized to fit your application.

INCHES
SHAFT SIZE DECIMAL SHAFT SIZE CODE A B
.938 015 1.500 1.312
1.000 016 1.562 1.312
1.125 018 1.687 1.312
1.250 020 1.812 1.312
1.375 022 1.937 1.437
1.500 024 2.062 1.437
1.625 026 2.187 1.437
1.750 028 2.312 1.437
1.875 030 2.437 1.500
2.000 032 2.562 1.500
2.125 034 2.687 1.500
2.250 036 2.812 1.562
2.375 038 2.937 1.562
2.500 040 3.187 1.562
2.625 042 3.312 1.625
2.750 044 3.437 1.625
2.875 046 3.625 1.687
3.000 048 3.750 1.687
3.125 050 3.875 1.750
3.250 052 4.000 1.750
3.375 054 4.125 1.750
3.500 056 4.250 1.875
3.625 058 4.375 1.875
3.750 060 4.500 1.875
3.875 062 4.625 1.875
4.000 064 4.750 1.875
1.125 066 7.875 1.875
4.250 068 5.000 1.875

SIZES: Metric and sixteenth seals available against specific orders. Larger shaft diameters available against speficic orders.

Operating Specifications

Temperature limit:
-40C F to ﹢400 F ( -40 C to +205 C)
based on standard elastomers
Pressure limit to: 300 psi
Shaft speeds to: 3600 rpm

Standard Material Construction

Metal Components: Bellows ~ AM 350, End Fittings 316 SS
Face: Chemical Grade Carbon or Tungsten Carbide
Elastomer: Standard Industrial Components (other materials avaialable upon request)

Total Warranty

All Robco seals are manufactured to exact standards, and are guaranteed free of defects in materials and workmanship. All seals are guaranteed for 90 days from delivery, excepting negligence, misuse and abuse, and will deliver at our expense a new seal to replace any seal found to be defective within said period. No registration card is required.

The warranty is expressly in lieu al all warranties, expressed or implied, and of all obligation or liabilities on our part, including any liability for incidental or consequential damages.

Disclaimer

The temperature limits, pH ranges, pressure ratings, feet per box and shaft speeds shown throughout this pamphlet are representative; the service life and performance of these products can be affected by elevated temperatures and other operating conditions such as chemical resistance, shaft speeds, pressure and equipment in which that the product is being installed. The ratings supplied are suggested as a guideline and should only be used for evaluating your specific application. When in doubt, contact Robco or your ENVIROPAK distributor. The information contained in the pamphlet should not be considered to be a warranty, expressed or implied, including, but not limited to, a warranty of merchantability or fitness for a particular purpose. In no event shall Robco be liable for any incidental or consequential damages resulting from the use, misuse or inability to use the products. This exclusion applies regardless of whether such damages are sought based on breach of warranty, breach of contract, negligence, strict liability in tort, or any other legal theory.

All Robco mechanical seals are manufactured, assembled and tested in America.